Janome MyLock 634D Serger
was $799.00 Special Price $699.00
Usually ships in 7-10 business days
When you want to make the most of your serging time, with professional results, the MyLock 634D is unmatched.
Did you find this item priced lower than $699.00 somewhere else? If so, let us know. We strive to match or beat most offers!Yes
When you want to make the most of your serging time, with professional results, the MyLock 634D is unmatched. It has 2 needles and 2, 3 or 4 thread overlock stitching. Threading is a breeze due to color-coded thread guides and an easy lower looper threading system. The MyLock 634D also lets you quickly switch to rolled hemming without changing the needle plate.
|Features||The Janome MyLock 634D with electronic control is the most advanced MyLock serger. It has 2 needles and 2, 3 or 4 thread overlock stitching. The differential feed ratio is adjustable from .05 to 2.25 and provides increased control for all types of fabrics and special effects.
Threading is simple due to the color-coded thread guides and a self-threading lower looper. Simply lay the thread into the guide, flip a switch, and the lower looper is threaded.
The guide is automatically returned to its normal position when you turn the balance wheel. And when you lift the presser foot for rethreading, the thread tensions are automatically released so you can draw the thread smoothly.
This self-threading serger also lets you quickly switch to rolled hemming without changing the needle plate. A lower looper pre-tension stitch eliminates the need to change tension for rolled hems.
• 2, 3, or 4 thread serger
• Lay-in thread tension dial
• Threading chart
• Color coded thread guides
• Tension release device
• Easily accessible lower looper guides
• Changeable thread guide
• Quick change rolled hem
• Lower looper pretension setting slider
• Easily retractable upper knife
• Adjustable foot pressure
• Snap on presser feet
• Adjustable stitch length 1mm to 5mm
• Differential feed ratio 0.5 to 2.25
• Adjustable cutting width 3.1mm to 7.3mm
• Maximum speed 1,300 spm
• Waste chip box
|Built-In Stitches||• Standard Serging
• Rolled Hemming
• 3/4 Thread Serging
• 2 Thread Serging
• Picot Edging
• Narrow Hemming
• Decorative Overedging
• Pin Tucking
|Included Feet||Standard Serging Foot|
|Included Accessories||• Upper Knife (1)
• Needle Threader
• Set of Needles
• Thread Stripping Discs
• Needle Plate (standard)
• Spool Nets (4)
• Spool Caps (4)
• Spool Holders (4)
• Lint Brush
• Screwdriver (L, S)
• Waste Chip Box
|Warranty||• 5-Year Limited Waranty|
Write Your Own Review
We found other products you might like!