Floriani Stabilizer Heat N Gone Topping

Use this remarkable 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260°-300° F (120°-140° C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture. Trace intricate quilt patterns or designs that you want to free motion stitch for a perfect guide to follow on top of the fabric!

To use as a topping:

Place a piece of Heat N Gone on top of the hooped item, bumpy side down, and secure with pins or tape. Once the embroidery is complete, tear away as much of the Heat N Gone as possible. Place your heated iron to the top of the garment to remove the excess stabilizer. Be sure your iron temp is a least 260° F (120°C).

To use as a stabilizer:

Place a piece of Heat N Gone within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop. The bumpy side of the stabilizer should be against the fabric. Once the embroidery is complete, tear away as much of the Heat N Gone® as possible. Follow the steps above for removing any remnants left around the design.