Quilters Select Tearaway (Fusible)

This ultra-lightweight tearaway foundation has just the right amount of body to support dense satin stitch applique, removes easily from your lightest stitching. The temporary fusible coating will secure the fibers of your fabric eliminating pinning or distortion.

Directions for Use and Care

To stabilize for satin stitching or applique::

• Cut a piece of Select TearAway slightly larger than the area to be stitched or embellished.
• Place the shiny side of the stabilizer to the wrong side of the fabric.


• Cover the Select Cutaway with a pressing cloth or piece of cotton.
• Press using a medium iron temperature (wool).


• Square the block by trimming away the excess Cutaway.

To stabilize for embroidery::

• Cut a piece of Select TearAway at least one inch larger than the embroidery frame intended for use.
• Place the shiny side of the stabilizer to the wrong side of the fabric.


• Cover the stabilizer with a pressing cloth or piece of cotton.
• Press using a medium iron temperature (wool).


• Place the now stabilized fabric within the hoop and stitch.
• Once stitching is complete, remove the article from the embroidery frame and gently tear away the excess stabilizer.

Washer and Dryer Safe

Cool water and low drying temperature recommended.