Skip to product information
1 of 2

Bernina

Bernette Button-Sew-On Foot b37/b38

Bernette Button-Sew-On Foot b37/b38

SKU: 5020601357

Regular price $15.99
Sale price $15.99 Regular price 0% off

With this presser foot not only buttons of different sizes can be sewn on but also rings or hooks. The Button sew-on foot provides a slip-resistant sole so that the button cannot slip away.

$15.99
View full details

With this presser foot not only buttons of different sizes can be sewn on but also rings or hooks. The Button sew-on foot provides a slip-resistant sole so that the button cannot slip away.

witch off the machine. Attach the foot as described in the instruction manual.

Applications:

  • Sewing on buttons

Stitch type: zigzag stitch

Stitch width: 4 mm, adjusted according to the button

Needle position: center

Feed dog: lowered/covered

Place the button onto the fabric and move them both under the presser foot. Lower the needle into the left hole of the button by turning the hand wheel. Lower the presser foot to hold the button in position, ensuring that the button is aligned correctly. Using the hand wheel, check that the needle goes into the right hole. Adjust the stitch width if necessary. Sew several stitches. Cut the threads long enough, use a hand sewing needle to pull the upper thread to the back and tie off the threads.

If a shank is required, place a darning needle on the button and sew.
For buttons with four holes, sew the front two holes first, then move the sewing forwards and sew the back two holes.
Available for purchase onlineAvailable Online and In-Store