Pfaff Piping Foot 820532-096

Piping Foot

Use this foot to insert packaged piping into seams and edges for a tailored finish. Or cover piping cord with fabric to create your own specialty piping.

To stitch packaged piping into a seam:

1. Snap on the Piping Foot

2. Place piping along the seam line on right side of fabric. Place second piece of fabric on top with right sides together.

3. Put fabric and piping layers under Piping Foot with the piping in the groove on the under- side of the foot. Sew with a straight stitch, length 2.5. The groove on the underside of the foot will guide the piping as you sew.

To make piping from your fabric:

1. Cut bias or crosswise grain strips, wide enough to cover the cording plus seam allowances.

2. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.

3. Place the fabric and cord under the Piping Foot with the cord in the groove on the under- side of the foot.

4. Stitch. The groove will guide the cord so the fabric covers evenly.

TIP:

When you sew this piping into a garment, adjust the needle position so it stitches one setting closer to the cord to cover the first stitching.

Works with these groups of Pfaff machines:

A, B, C, D, E, F, G, J, K

What Group is my machine?