Viking Adjustable Stitch in the Ditch Foot for IDF System

1. Snap on the Adjustable Stitch-in-Ditch Foot. Thread with matching thread or invisible

thread on top and thread to match your quilt back in the bobbin.

2. Place the fabric to be stitched under the presser foot aligning the guide in the center of the

foot with the seam. The guide will automatically fall on the low side of the seam and will

stitch flawlessly down the seam of your quilt or binding.

3. If the stitch is not in the seam you can move the needle up to three steps to the left or right

to get the stitch perfectly lined up.

4. To pivot ¼” (6 mm) from the end, stop sewing when the front line on the foot is even with

the edge of the fabric.