Dream World Acrylic Cabinet Insert
If you need help determining which "Opening Dimensions" to choose, please Click Here for Detailed Instructions on how to determine all the inforamtion you'll need
Sew Steady Cabinet Insets & Inserts are designed to fit your specific make and model of sewing machine and cabinet. Fills gaps around your sewing area. Made with one of the highest grades of acrylic. Please select the opening dimensions of your cabinet. If you do not see your size listed here, double-check your measurements. The make and model of cabinet are also needed to help ensure the proper size insert is selected. Click Here for more information about determing your cabinet opening
• Inserts with a lip rest on the cabinet top (as photo above illustrates).
• Insets without a lip sit flush with the cabinet top inside, resting on a ledge within the cabinet opening.
Sew Steady inserts & insets are custom products - please allow 3 - 5 weeks for delivery
* Please Note: Inserts are custom made to your machine and the width of the opening of the cabinet or table. Depending on the size of your sewing machine compared to the opening of the cabinet or table, the insert may not extend all the way around machine as shown. Machines must be smaller than the cabinet opening by a minimum 3.5" in depth at widest part (front to back) and 2" in length(left to right) for insert to wrap completely around machine as shown in picture. If the machine is wider or longer than these minimums we may still be able to make a Filler piece to help fill gaps and still create a smooth sewing surface. The standard position of the machine in the cabinet opening from front to back is centered. The standard position of the insert from right to left is to have the machine sit 1-3" to the left of the opening to allow room for the machine to lower up and down on the lift. The 1-3" gap allows room for the wheel and cords that typically are located on the right of the machine.
|Type of Lift||N/A|
|Ready to Assemble or Fully Assembled||N/A|