Just Glamorous: Sewing with WonderFil GlaMore Thread
|
Time to read 5 min
Wanna jazz up your next project? Well, just add a bit of "GlaMore"!
WonderFil GlaMore is a 12wt 2-ply thread made from contrasting rayon strands woven with metallic fibers. That combination gives every stitch a brilliant, shimmering finish that catches the light without being stiff or scratchy. It is thin enough to feed cleanly through a sewing machine needle while being substantial enough to stand out beautifully in every stitch.
GlaMore comes in five color assortments: blue, green, metallic, pink, and yellow. Each kit includes five coordinating spools so you can mix across a single project or keep a dedicated palette ready on your machine. Whether you are adding sparkle to quilting, decorative stitching, embroidery, or serging, there is a GlaMore assortment to match your vision.
A Thread That Does a Little of Everything
GlaMore is one of those threads you can truly use across your whole sewing room. On your sewing machine or embroidery machine, it delivers gorgeous decorative stitches with a luminous finish. Load it on your serger and it transforms plain edge finishes into something truly special. You can even use it for bobbin work, where the shimmer goes right to the back of the fabric for effects that sew up from underneath.
I have used GlaMore on quilts, garments, and all kinds of decorative projects and it always gets compliments. It is one of those threads that makes a simple stitch look intentional and special. Browse the full WonderFil collection to see all the specialty threads we carry.
WonderFil GlaMore 5-Spool Thread Assortment
The WonderFil GlaMore 5-Spool Thread Assortment gives you five coordinating spools in a single kit, available in blue, green, metallic, pink, and yellow assortments. The 12wt 2-ply construction combines rayon and metallic fibers for a shimmer that holds up through washing. It is bold enough to stand out in decorative stitching and elegant enough for garment accents.
SHOP GLAMORE THREADUsing GlaMore on Your Sewing or Embroidery Machine
Because GlaMore is a heavier thread, needle selection makes a real difference. Use a topstitch needle in size 16 or 20. Topstitch needles have a larger eye and a deeper groove along the shaft, both of which help the thread feed smoothly without shredding or skipping stitches. A standard needle will fight you with a thread this weight.
Use an external thread stand when sewing with GlaMore. Because of the metallic content, this thread unwinds best when it feeds vertically off the top of a free-standing spool, not off the side of your machine's built-in spool pin. A thread tower takes the twist out of the feed and keeps your tension consistent from start to finish.
Telescoping Metal Thread Stand
The Telescoping Metal Thread Stand holds your spool at the right height and feeds thread vertically into the machine. This is exactly what metallic and specialty threads need to perform well. Without it, you will often see tension issues, thread breaks, and frustrating skipped stitches. With it, the thread unwinds cleanly and your machine handles it beautifully. This is a small investment that makes a noticeable difference.
SHOP THREAD STANDKlasse Topstitch Sewing Machine Needles
Klasse Topstitch Needles are the go-to choice for heavier specialty threads like GlaMore. Their extra-large eye and deep thread groove protect the thread as it passes through the needle at speed, so you get clean stitches without shredding. Size 16 works well for most GlaMore projects, and size 20 is ideal if you are seeing any thread breakage or uneven tension. Keep both sizes on hand and you will be ready for any decorative project.
SHOP TOPSTITCH NEEDLESGlaMore on Your Serger
GlaMore is absolutely beautiful on a serger. The metallic shimmer catches the light along every seam finish, turning a functional stitch into a decorative detail. You have several options for how to use it:
- Place GlaMore in the upper looper for a glam edge visible from the top of your work
- Load it in both loopers for full shimmer all the way around the stitch
- Use it for a rolled hem and get a shimmering narrow finish perfect for scarves, napkins, or garment edges
- On a coverstitch or deco looper, GlaMore creates a professional decorative finish on knit hems and cuffs
Bobbin Work with GlaMore
For bobbin work, wind GlaMore onto the bobbin and sew with your fabric face down. The GlaMore thread feeds from underneath and creates the visible decorative stitching on the right side of your work. This technique lets you achieve a bolder, thicker look than you can get through the needle alone, and the shimmer comes up beautifully on quilt tops, garment fronts, and decorative projects.
Because you are sewing with the design side facing down, the key is making sure your design placement is correct before you start. Take a few practice stitches on a scrap first to dial in the tension. A slightly looser top tension usually gives the best result for bobbin work with specialty threads.
GlaMore is one of those threads that makes everything it touches a little more special. With the right needle and a thread stand, it sews up beautifully on any machine. I know you will enjoy working with this thread as much as I do! Shop the full WonderFil thread collection or our complete selection of thread sets and kits at Quality Sewing. Give us a call at (800) 687-5175 with any questions about specialty threads.
Happy Sewing,
Reva
Frequently Asked Questions
What is WonderFil GlaMore thread?
WonderFil GlaMore is a 12wt 2-ply thread that combines rayon strands with metallic fibers. The rayon gives the thread a soft, smooth feel while the metallic component adds shimmer and brilliance. It comes in five coordinated 5-spool assortments: blue, green, metallic, pink, and yellow. GlaMore is suitable for decorative stitching, embroidery, serging, quilting, and bobbin work.
What size needle should I use with GlaMore thread?
Use a topstitch needle in size 16 or 20. Topstitch needles have a larger eye and a deeper groove than standard needles, which lets the heavier GlaMore thread pass through smoothly without shredding or causing skipped stitches. Size 16 works for most projects, and size 20 is the better choice if you see any thread breakage or tension issues. The Klasse Topstitch Needles are a reliable option that we carry in both sizes.
Do I need a thread stand to sew with GlaMore?
Yes, a thread tower or external thread stand is strongly recommended for GlaMore and other metallic or specialty threads. Because of the metallic content, this thread unwinds most cleanly when it feeds vertically off the top of the spool, rather than off the side from your machine's built-in spool pin. Without a thread stand, you are more likely to see uneven tension, thread twisting, and breakage. The Telescoping Metal Thread Stand solves this problem and works with all machine types.
Can I use GlaMore on my serger?
Yes. GlaMore works beautifully on a serger in several positions. Load it in the upper looper for a shimmering edge visible from the top, or use it in both loopers for full sparkle all the way around. It also makes a striking rolled hem finish for scarves, napkins, and garment edges. On a coverstitch machine, GlaMore in the deco loopers creates a professional decorative hem on knits and other garments.
How do I use GlaMore for bobbin work?
For bobbin work, wind GlaMore onto the bobbin and sew with your fabric face down. The GlaMore thread feeds from underneath and creates the visible decorative stitching on the right side of your finished piece. This lets you achieve a bolder look than you can get through the needle alone. Use a slightly looser top tension and test on a fabric scrap first to get the tension dialed in before working on your project.
